Chances are that you’ve decided to get on the bike and hit the trails at some point in the last few months, and the fact that you’ve made this decision is both admirable and likely to have gotten you quite far in terms of your fitness goals. However, one of the most common problems that people face when riding is discomfort – something that can be easily solved with the right Bike Stem Riser.
A stem riser is a part of your bike’s stem, the component that holds the handlebar and connects the components together. It’s common for riders to find that the height of their handlebars are too low, causing discomfort when they’re riding for extended periods. To combat this, a lot of people have turned to stem risers to increase the height of the handlebars, thus improving comfort, although some might be unaware of the kind of stem riser they need.
So first, let’s take a look at the different kinds of bike stem risers. Most modern stems are classified as either threadless stems or quill stems. A threadless stem is the most common type of stem you’ll find on new bikes, everything from road bikes to mountain bikes. These types of stem risers are usually adjustable and can be changed to fit the height of your handlebar.
On the other hand, quill stems tend to be the most common type found on older bikes, as they’re the most traditional. These risers are not adjustable and require a special adaptor that you can purchase for a few dollars. Once you’ve found the right type of adaptor, you can attach the riser to the stem.
When you’re trying to find the perfect stem riser, there’s a few things you should keep in mind. The first is the rise of the stem riser and the second is the size. The height of the stem riser is usually measured in millimeters, and the lower the number, the lower the rise, which makes it a great choice for those who don’t want a significant rise in their handlebars. On the other hand, if you’re looking for a more dramatic increase, you can look for stem risers with higher measurements.
The size pertains to the length of the stem riser. You’ll want one that’s a bit longer than your current stem to avoid too much tension on the stem. This is why it’s important to measure your current stem before you purchase a new one, and always double check the measurements of the one you’re buying.
Once you’ve chosen the proper stem riser for you, the next step is installation. This part is fairly straightforward, especially if you are using a threadless stem riser, as you just need to loosen the tension on the stem to remove it and then replace it with the stem riser. If you’re using a quill stem riser, you’ll need to take the time to install the adaptor onto the quill stem before installing the riser.
Regardless, it’s important to make sure that the stem riser is properly fitted and securely tightened. Otherwise it may cause an increased risk of slipping or even worse, slipping off the stem altogether while riding.
It’s also important to keep in mind that stem risers are not the right choice for everyone. People with certain injuries may find that a different solution is more appropriate for their needs, and it’s always better to be safe and consult with your doctor first.
For those wanting to optimize their comfort on the bike, a Bike Stem Riser can be the right solution – as long as you choose the proper size and follow proper installation protocols. With the right stem riser, you’ll be able to go further and push harder, and what more could you ask for?